External wall cleaning is a dangerous and hard work. Many tools are needed in the construction process, including working rope, safety rope, hanging plate (seat plate), safety belt, self-locking device, U-shaped card, work bucket, high-pressure water pipe, glass set tools, board brush, rubber gloves, medicament spray pot, etc.

1. Working Rope: made of nylon, specification: diameter: 20mm, function: it is mainly used for hanging plate seat plate and climbing operation. The working rope is connected with the hanging plate through the movable joint in the sliding buckle to form a high-altitude hanging plate series. The life rope is connected with the self-locking hook on the safety belt of high-altitude personnel to form a safety system for climbing personnel.

2. Safety rope: made of high strength wire, specification: diameter: 18mm-20mm, function: mainly used for working rope. High altitude personnel hang on the working rope through the seat plate, and connect the self-locking buckle of the safety belt to the safety rope with the self-locking device, which can ensure the improvement of the safety factor.

3. Hanging plate: also known as seat plate, the material is made of shrink board, and the sling is made of fiber textile, which has certain tensile strength. Function: during the construction of hanging from high altitude, the personnel at high altitude will sit on the hanging plate and slide downward. The fracture load of the antiskid seat plate is more than 4400 n.

4. Safety belt: made of fiber. The safety belt is composed of two shoulders and a belt, which is connected with the working rope through the self-locking hook.

5. Self locking device: made of stainless steel. Function: connect the safety belt with the safety rope. When the high-altitude construction personnel fall due to the broken working rope, the self-locking device of the self-locking hook will self-lock due to the weight of the human body, so that the falling person is stopped by the life rope.

6. U-clip: it is a U-shaped buckle made of 16mm high-strength steel and connected with bolt pin.



7. Glass set tools: including: water applicator, glass scraper, marble blade, extension rod, absorbent sponge, rubber strip. Function: used for all kinds of mirror surface.



8. High pressure water pipe: transparent plastic hose, high pressure hose.