Waterproof is the top priority of toilet decoration project. Once waterproof is not done well, problems will inevitably occur after occupancy. For some owners, it is the first time for them to make friends. today. Small make up for you to introduce some toilet waterproof skills.

1. Must do the wall waterproof, before paving the wall tile, completes the wall waterproof. In general, the wall surface should be treated with 30 cm high waterproof treatment, but for the light weight wall without load bearing, the whole wall should be waterproof, at least 60 cm high.

2. The joints between the wall and the ground and the joints between the upper and lower pipes on the ground are the most prone to problems. Workers must be urged to deal with these edges and corners, and the waterproof coating must be applied in place.

3. If the original floor tiles in the toilet need to be replaced, the ground must be leveled with cement mortar before waterproof treatment, so as to avoid leakage of waterproof coating due to uneven thickness. Before waterproof, the ground must be cleaned up.

4. Try not to damage the original waterproof layer. In general, the ground of the newly delivered building is made of waterproof layer. Therefore, leakage will not occur if the original waterproof layer is not damaged.